Â
Car dual screen - instrument cluster¢ral control multimedia screen(12.3 inch+7 inch)
Â
Â
Â
Item |
Contents |
Remark |
CTP size (inch) |
12.3 inch |
central control multimedia touch screen |
TFT LCM size(inch) |
7 inch |
instrument cluster |
CTP Interface Type |
IIC |
 |
Structure type |
Cover glass+ITO Glass+TFT LCM |
 |
Drever IC |
Atmel MXT1189TD |
 |
The total tickness |
6 mm |
 |
Operating temperature |
-30 °C ~ 80 °C |
 |
Storage temperature |
-40 °C ~ 85 °C |
 |
Â
Â
Item |
Specification |
Remark |
The operating system |
Support WIN10,Android,LUX,LINX System |
 |
Touch points |
10 Touch points |
 |
Normal Working voltage |
3.3V |
 |
IC Working voltage |
3.3V |
 |
Â
Â
Item |
Contents |
Remark |
Transparency |
≥85% |
 |
Haze |
7% |
Customized according to customer needs |
Â
Â
Item |
Specifications |
Remark |
High Temperature Storage |
80ºC,120hrs, Placed in room temperature 24h, the sample was tested. |
 |
Low Temperature Storage |
-40ºC, 120hrs, Placed in room temperature 24h, the sample was tested. |
Non-condensing |
TemperatureHumidity Storage |
85ºC/85% RH,240hrs, normalized for 2 hrs |
Non-condensing |
Thermal Shock |
-30 ~ 80℃, 60 min/cycle , Total 50 Cycles, Start with cold temperature and end with high temperature |
 |
Â
Â
Item |
Specification |
Hardness |
7H |
Ball Drop Test |
Steel ball,65 g ,1 Drop Points , Height 70cm |
Package drop |
Packaging from 50 cm high drop without damage |
Â
Condition: the user can be used in daily contact to place the table below for discharge test, each test point do 3 times, each time;To test the electric interval of 5 seconds, discharge capacitance value 330 pf, discharge resistance for the 2 k ohms.
Â
Discharge position |
Discharge way |
Discharge voltage |
Test requirements |
Panel |
Contact discharge |
±8KV,Times |
B |
Air discharge |
±12KV,Times |
B |
Â
B: during the period of interference, device or system all functions in line with the actual requirements, some indicators allow paint, such as touch screen touch a little insensitive, minor position offset, etc., but after you remove the interference, out-of-tolerance indicators can automatically return to normal.
Â
Â
Â
Â
Â
Â
Â
Â
1)Product sampling/production cycle?
Sample production for 2-3 weeks
Mass production for 3-4 weeks
Â
2)How About MOQ?
MOQ:100 PCS.
Our company is willing to grow up with you together.
Â
3)How long is the product warranty period?
Warranty period of 1 year.
Â
4)What else can we do for you?
We are a production oriented factory that integrates research and development, production, and sales. We can customize mold opening according to customer needs.
Â
http://www.szhygtech.com/